Setting The Time Of Day Format; Setting Automatic Display Dimming - Silvercrest SKRD 30 A1 Bedienungsanleitung

Handling and operation
♦ Select with the buttons Preset+
date to be set.
♦ Set with the buttons Tune+
With each button press the date is changed by one day. Holding down the
respective button for more than 2 seconds starts the speed setting.
►
♦ Press the button Lock/Mem.
function is to be triggered. The setting is carried out with the buttons Tune+
and Tune–
programmed reminder dates
♦ Press the Bass/AMS/Mode
move to the next menu item.

Setting the time of day format

Prerequisite: The device is in the operational mode clock/standby operation.
♦ Press the Bass/AMS/Mode
time of day format is shown ( =24 hour format or =12 hour format).
♦ With the button Tune+
of day display in the 24 hour format .
♦ With the button Tune–
of day display in the 12 hour format .
♦ Press the Bass/AMS/Mode
move to the next menu item.

Setting automatic display dimming.

Prerequisite: The device is in the operational mode clock/standby operation.
♦ Press the Bass/AMS/Mode
automatic display dimming is shown (
function switched off ).
♦ With the button Tune+
should be switched on and off at a setable time.
♦ With the button Tune–
to be switched on permanently.
♦ Press the Bass/AMS/Mode
move to the next menu item.
SKRD 30 A1
NOTICE
Press the Dimmer/AOT
for the currently set date. The reminder now occurs every year on the
same date. . To deactivate the memory function, programme in a date
that lies in the past.
on the hour between 00 and 23. This setting applies to all
12
13
12
13
12
and Preset–
11 10
and Tune– the date for this memory slot.
12
13
button if you want to switch off the date
5
to set the time of day at which the reminder
6
button again to save the current setting and
7
button four times. The current setting for the
7
set the time of day format to
set the time of day format to
button again to save the current setting and
7
button fi ve times. The current setting for the
7
= function switched on or
set the function if the display illumination
set the function if the display illumination is
button again to save the current setting and
7
the memory slot for the
13
if you want a time
if you want a time
=
GB
IE
13