Installation - Hama EWS-880 Bedienungsanleitung

• Keep the packaging material out of the reach of children due to the risk of suffocation.
• Dispose of packaging material immediately according to locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
Warning – Batteries
• Immediately remove and dispose of dead batteries from the product.
• Only use batteries (or rechargeable batteries) that match the specified type.
• Do not mix old and new batteries or batteries of a different type or make.
• When inserting batteries, note the correct polarity (+ and - markings) and insert
the batteries accordingly. Failure to do so could result in the batteries leaking or
exploding.
• Do not charge batteries.
• Keep batteries out of the reach of children.
• Do not short circuit the batteries/rechargeable batteries and keep them away from
uncoated metal objects.
4. Getting Started
4.1. Measuring station
• Open the battery compartment (23) and insert two AA batteries with the correct polarity.
• Move the CH slide switch (22) to the left or right to select the channel on which the
measuring station transmits.
• Once the channel is assigned to one transmitter, you can only change it by removing the
batteries or resetting the unit.
• Close the battery compartment.
Note
Before use, ensure you insert the batteries in the measuring station first and then in the
base station.
4.2. Base station
• Remove the screen protector from the display.
• Open the battery compartment (18) and insert two AA batteries with the correct polarity.
4

5. Installation

Note – Installation
• We recommend initially placing the base and measuring stations in the intended
locations without installing them and making all the settings described in
– to do.
6. Operation
• Only install the stations once the appropriate settings have been made and a stable
wireless connection is established.
Note
• The wireless transmission range between the measuring
and base stations is up to 50 m in open spaces.
• Before installation, ensure that wireless transmission will not be disrupted by
interference or obstacles like buildings, trees, vehicles, high-voltage lines, etc.
• Before the final installation, ensure that there is sufficient reception between the
intended installation locations.
• When installing the measuring station, ensure that it is protected from
direct sunlight and rain.
• The international standard height for measuring air temperature
is 1.25 m (4 ft) above ground.
Warning
• Buy special or suitable installation material from a specialised dealer for wall-mounting.
• Ensure that no faulty or damaged parts are installed.
• Never apply force during installation. This could damage the product.
• Before installation, ensure that the chosen wall is suitable for the weight to be
mounted, and make sure that there are no electrical wires, water, gas or other lines at
the installation site on the wall.
5