Hama EWS-880 Bedienungsanleitung Seite 2

10 11
1
12
2 13
6
3
4
8
M 7
DST
5
19
21
433 MHz
THERMO SENSOR
G Operating instruction
Controls and Displays
A
9 15 A Base station
1. Weather forecast symbol
2. Channel display
3. Outdoor temperature
4. Room temperature
SNOOZE / LIGHT
5. Time
14
ALARM CH ME M DISPL AY
6. Measuring station radio symbol
SET SET
°C °F SENSO RR CC RESET 16
7. Alarm symbol
8. Radio symbol
17
9. SNOOZE/LIGHT button
= stop the alarm/activate the backlight (approx. 5 seconds)
10. ALARM SET button
= display/set alarm mode
11. CH+ button
= select channel/increase the current set value
12. °C/°F slide switch
= switch between °C and °F
18
13. SENSOR button
= manual search for a signal from the measuring station
B
14. DISPLAY SET button
= settings/confirm the set value
15. MEM button
= access the saved maximum/minimum values/reduce of the current set value
MADE IN CHINA
16. RESET button
20
= restore factory settings
17. RCC button
RESETCH 1 2 3
22 = activate/deactivate manual radio signal reception
18. Battery compartment
B Measuring station
19. Transmission indicator lamp
23
20. Opening for wall mounting
21. RESET button = restore factory settings
22. CH slide switch = channel selection
23. Battery compartment
2
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep
these instructions in a safe place for future reference. If you sell the device, please pass these
operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific
hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
• Weather station EWS-860
(base station for indoors/measuring station for outdoors)
• 4 x AA batteries
• These operating instructions
3. Safety Instructions
• The product is intended for private, non-commercial use only.
• Do not operate the product outside the power limits given in the specifications.
• Do not use the product in moist environments and avoid splashes.
• Do not use the product in the immediate vicinity of heaters or other heat sources or in
direct sunlight.
• Do not use the product in areas where the use of electronic devices is not permitted.
• Do not place the product near interference fields, metal frames, computers, TVs, etc.
Electronic devices and window frames can negatively affect the product's functionality.
• Do not drop the product and do not expose it to any major shocks.
• Do not open the device or continue to operate it if it becomes damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to
qualified experts.
3