HBM C2 Montageanleitung Seite 18

18
C2
General dangers due to non-observance of the safety instructions
The C2 load cells correspond to the state of the art and are fail-safe. The load
cells can give rise to residual dangers if they are inappropriately installed and
operated by untrained personnel.
Everyone involved with the installation, commissioning, maintenance or repair
of a force transducer must have read and understood the Mounting
Instructions and in particular the technical safety instructions.
Residual dangers
The scope of supply and performance of the load cells covers only a small
area of weighing technology. In addition, equipment planners, installers and
operators should plan, implement and respond to the safety engineering
considerations of weighing technology in such a way as to minimize residual
dangers. Prevailing regulations must be complied with at all times. There must
be reference to the residual dangers connected with weighing technology.
In these mounting instructions residual dangers are pointed out using the
following symbols:
ATTENTION
Symbol:
Meaning: Possibly dangerous situation
Warns of a potentially dangerous situation in which failure to comply with
safety requirements could lead to damage to property, slight or moderate
physical injury.
HBM A1683-1.0 de/en/fr