Contraindications; Fitting Instructions; Storage Instructions; Care Instructions - Medi Humeral fracture brace Gebrauchsanweisung

medi Humeral
fracture brace
Intended purpose
medi Humeral fracture brace is a
shoulder orthosis. The product is
exclusively to be used for the orthotic
fitting of the upper arm and only on
unbroken skin or if any wounds have
been properly covered.
Indications
• Postoperative care of subcapital or
shaft fractures to the humerus
• Conservative care of humerus
fractures

Contraindications

None known at present.

Fitting instructions

• Open the velcro fasteniers around the
upper arm and the pad at the front.
• Place the upper arm cuff around the
affected arm and close the main velcro
fastener (Fig. 1).
• Now take the strap round the back and
under the armpit of the uninjured arm
to the front and fasten it there (Fig. 2).
Take care that the fastener for the
forearm support sits in the sternum
area.
• Now close the two straps on the upper
arm (Fig. 3).
• Place the forearm in the support and
fasten with the click closure. (Fig. 4)

Care instructions

Velcro fasteners should be closed for
washing. Soap residues, lotions and
ointments can cause skin irritation and
material wear.
• Wash the product by hand, preferably
using medi clean washing agent.
• Do not bleach.
• Leave to dry naturally.
• Do not iron.
• Do not dry clean.
    

Storage instructions

Keep the product in a cool, dry place and
do not expose to direct sunlight.
Material composition
Polyamide
Liability
The manufacturer's liability will become
void if the product is not used as
intended. Please also refer to the
corresponding safety information and
instructions in this manual.
Disposal
The product can be disposed of in the
domestic waste.
Your medi team
wishes you a speedy recovery!
Deutsch English