Maintenance And Care; Technical Specifications - Kärcher DS 6.000 Bedienungsanleitung

Illustration
 Clean/rinse the intermediate filter as
necessary.
(see: CARE, MAINTENANCE)
Caution
All parts of the water filter must be properly
dried prior to assembly!
Transport, storage
Caution
Prior to storing the appliance, ensure that
no water remains in the water filter contain-
er and all parts of the water filter system are
properly dried.
 Hold the appliance at the carrying han-
dle when you want to transport it and
store it in dry rooms.
Illustration
 The appliance can be stored in an up-
right position. On the bottom of the ap-
pliance there is an additional parking
position for the floor nozzle.

Maintenance and Care

Danger
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance work.
Cleaning/replacing the intermediate
Note: Clean the intermediate filter at least
every 8 weeks with normal use. If the suc-
tion performance is deteriorating, the filter
must be cleaned sooner.
Use a commerically available soft house-
hold sponge to clean the filter to avoid dam-
aging the coated fins.
Illustration
 The individual fins of the intermediate
filter can be cleaned under running wa-
ter using the sponge.
 Allow the filter to dry completely.
 With normal use, replace the intermedi-
ate filter at least every 12 months, if
necessary, it can be replaced sooner.
Note: The intermediate filter must be
disposed off as residual waste.
16
filter
Cleaning the appliance and
Danger
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in
water.
Illustration
 Suction hose and handle can be disas-
sembled for cleaning.
 Check the accessories for obstructions
and clean if necessary. Do not use wa-
ter to clean the floor nozzle.
Clean the turbo floor nozzle
* depending on model
Cut hair that is entangled in the roller brush
along the cutting edge with a pair of scis-
sors, and vacuum them off using the crev-
ice nozzle.
Change HEPA filter
Note: In order to ensure an optimised
cleaning performance and function of the
appliance, this filter must be changed at
least every 12 months. Replace sooner if
damaged or extremely dirty.
Caution
Do not rinse out the HEPA filter!
 Remove the outgoing air flap.
Illustration
 Remove the HEPA filter.
 Insert a new HEPA filter so that it
"CLICKS" into place.
 Reinstall the lid so it "CLICKS" into
place.

Technical specifications

Nominal voltage
1~50/60 Hz
Output P
nom
Fill capacity of the water
filter reservoir
Sound
Weight (without accesso-
ries)
Nominal width, accesso-
ries
– 9
EN
accessories
220-240 V
900
1,7
66
7,5
35
W
l
dB(A)
kg
mm