To Use As An Open Grill - Gastroback 42534 Design Grill-Barbecue Advanced Bedienungsanleitung

1. Prepare the appliance for use:
Fully unwind the power cord from the cord storage. Place the appliance on a heat-resistant
stable surface (see: ›Important safeguards‹). If you want to use the appliance as an open grill,
you need at least 50 cm of free space on the rear for the appliance.
Slide the grilling height control on the right metal arm of the top plate to the OPEN position to
unlock the top plate (see: ›Adjustable grilling height control ‹). Ensure, that the cooking plates
are clean and that there are no objects on the cooking plates.
Ensure the removable drip tray is correctly inserted and positioned back into the appliance and
snapped into place (see: ›Properties of your Design Grill-Barbecue Advanced‹).
WARNING!
Do not operate the appliance without the drip tray
to avoid hot fat and juices spilling and causing scalds and dama-
ge. Solely use handles and knobs for handling the appliance (i.e.
handle, dials, grilling height control). Do not touch the cooking plates
or other hot parts of the appliance during operation.
2. Insert the plug into a suitable power outlet (220/240V, AC, 50/60 Hz; see: ›Important safe-
guards for electrical appliances‹). Close the top plate for a more efficient preheating.
3. Turn the tilt dial to the required position: FLAT = level, ANGLE = inclined. (see: ›Base plate
tilt dial‹) It is important that the base plate is in the FLAT (level) position when using as an open
grill.
4. Switch ON the power switch. The red HEATING power indicator will illuminate. Ensure the
grilling height control is in the OPEN position.
5. Turn the temperature dial to the required position for fast preheating. SEAR for meat and
similar foods. SANDWICH for sandwiches.
Note: The red heating light will cycle on and off during the cooking process indicating that the
correct temperature is being maintained.

To use as an open grill

IMPORTANT: Always turn the tilt dial to the FLAT position (level),
when using as an open grill.
1. Prepare the grill for use as described in section Operating your
Design Grill-Barbecue Advanced.
2. Ensure, that the tilt dial is in the required FLAT position.
3. Turn the temperature dial to the required position and allow the
grill to preheat until the red heating power indicator goes out.
4. Close the top plate with the grilling height control in the OPEN position. Turn the grill lock dial
on the left side of the hinge to the vertical position (OPEN grill).
5. Use the handle to fold the top plate carefully back into the open position.
Note: Please keep in mind, that even the exterior of the top plate will become very hot during
operation. Ensure to touch the appliance only by the handles and knobs.
WARNING!
During operation and especially on placing food on the preheated cooking
plates or on opening the grill during operation, hot fat and juices could splash from the appli-
ance. Always keep your hands and arms as well as any other objects in sufficient distance to
45