Herunterladen Inhalt Inhalt Diese Seite drucken

Initial Operation - Bosch PDO Multi Originalbetriebsanleitung

Weu digitales ortungsgerät
Vorschau ausblenden Andere Handbücher für PDO Multi:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Remove the battery/rechargeable battery from the meas-
uring tool when not using it for longer periods. When stor-
ing for longer periods, the batteries/rechargeable batteries
can corrode or discharge themselves.
Operation

Initial Operation

Protect the measuring tool against moisture and direct
sun light.
Switching On and Off
Before switching the measuring tool on, make sure that
the sensor area 9 is not moist. If required, dry the measur-
ing tool using a soft cloth.
Do not subject the measuring tool to extreme tempera-
tures or variations in temperature. As an example, do not
leave it in vehicles for longer periods. In case of large varia-
tions in temperature, allow the measuring tool to adjust to
the ambient temperature before putting it into operation.
Avoid heavy impact to or falling down of the measuring
tool.
To switch on switch on the measuring tool on, press any but-
ton.
When switching the measuring tool on with the wood-detec-
tion button 5 or with the metal-detection button 6, it will auto-
matically be in the respective detection function.
When switching the measuring tool on with the "on/off" button
7 or with the "ZOOM" button 4, it will be in the detection func-
tion last used.
After a brief self-check, the measuring tool is ready for opera-
tion. When the measuring tool is in the metal-detection func-
tion, the service readiness is indicated through a check mark
behind the "AutoCal" calibration indicator g.
To switch the measuring tool off, press the On/Off button 7.
If none of the measuring tool buttons are pressed for approx.
5 minutes, the measuring tool switches off automatically in
order to extend the service life of the battery.
Before drilling, sawing or routing into a wall, protect your-
self against hazards by using other information sources.
As the measuring results can be influenced through ambient
conditions or the wall material, there may be a hazard even
though the indicator does not indicate an object in the sen-
sor range (no audio signal or beep and and the illuminated
ring 1 lit green).
Bosch Power Tools
English | 19
1 609 929 X41 | (28.10.10)

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

3 603 k10 000

Inhaltsverzeichnis