Inhaltsverzeichnis
Werbung
Getting to know your
appliance
Before reading the instructions, please
fold out the back pages. These operating
instructions refer to several models.
Diagrams may vary.
Figure 1
Example of features
1
Light switch
2
Temperature selector/interior light
3
Shelf in the refrigerator
compartment
4
Vegetable compartment
5
Ventilation grille
6
Shelf for tubes and small tins
7
Butter and cheese compartment
8
Egg rack
9
Shelf for large bottles
Ventilation
Fig. 1/5
he refrigerating unit is ventilated only via
the ventilation grille in the base. NEVER
cover or block the ventilation grille.
Otherwise, the refrigerating unit must
work harder, increasing the power
consumption.
Note ambient
temperature and
ventilation
The appliance can be operated at the
following ambient temperatures
depending on the climatic category" (see
rating plate). (The rating plate can be
found inside the appliance at the bottom
left hand side. Fig e).
Climatic
Ambient temperature
category
from...to
+10 °C bis 32 °C
SN
+16 °C bis 32 °C
N
+18 °C bis 38 °C
ST
T
+18 °C bis 43 °C
Connecting the
appliance
After installing the appliance, wait at least
1/2 hour until the appliance starts up.
During transportation the oil in the
compressor may have flowed into the
refrigeration system.
Before switching on the appliance for the
first time, clean the interior (see Cleaning).
The socket should be freely accessible.
Connect the appliance to 220 240 V/
50 Hz alternating current via a correctly
installed earthed socket. The socket must
be fused with a 10 A fuse or higher.
If the appliance is to be operated in
a non European country, check on
the rating plate whether the indicated
voltage and current type correspond
to the values of your mains supply.
en
15
Werbung
Inhaltsverzeichnis
