Before First Use - IKEA MEDELSTOR Anleitung

ENGLISH
rinse aid dispenser. In this case the drying
results may not be satisfactory.
With the rinse aid dispenser deactivated,
the rinse aid indicator is always off.
How to deactivate the rinse aid dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
to flash and the display is blank.
2. Press .
• The indicators
• The indicator
flash.
• The display shows the current setting.
– = rinse aid dispenser
activated.
– = rinse aid dispenser
deactivated.
3. Press to change the setting.
4. Press the on/off button to confirm the
setting.
Acoustic signals
The acoustic signals operate when the
appliance has a malfunction and it is not
possible to deactivate them.

Before first use

1. Make sure that the current level of the
water softener agrees with the
hardness of the water supply. If not,
adjust the level of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
and until
, and
and go off.
continues to
There is also an acoustic signal that
operates when the programme is
completed. By default, this acoustic signal is
on, but it is possible to deactivate it.
How to deactivate the acoustic signal for
the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
start
the indicators
flash and the display is blank.
2. Press
• The indicators
• The indicator
flash.
• The display shows the current setting:
–
–
3. Press
4. Press the on/off button to confirm the
setting.
inside the appliance. Do not use
detergent and do not load the baskets.
and
, ,
and
continues to
= Acoustic signal on.
= Acoustic signal off.
to change the setting.
12
until
start to
go off.