Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5....-05-KM 2717 New
GB
1 Utensil switch
2 Kitchen machine, basis appliance
3 Mixer vessel
4 Mixer vessel lid with filling slot
5 Filling slot seal
6 Disk for chips
7 Grating disk
8 Mixing bowl lid
9 Mixing bowl driveshaft
10 Mixing bowl
Assembly of mixing bowl and lid
Please all parts before using for the first time (see „Cleaning").
1. Place the bowl (10) on the base (2) in such a way that the left
bowl is pointing to the lower
until you hear it lock into place. The right
the
mark on the base.
2. Place a tool (14, 15, 16) on the drive axle.
3. Press the equipment you wish to use (grating or cutting attachments) - to be
found in the accessories drawer (20) - as far as it will go on to the device holder
(14).
4. Attach the locating pin (21) to the selected tool. The metal tip points upwards.
5. Place the lid on the bowl (8) so that the left
mark on the bowl. The metal tip of the locating pin (21) has to engage into its
bearing in the lid. Then turn the lid clockwise until the protruding section on the
lid is heard to lock into place in the safety lock opening on the base of the
machine. Now the right
bowl. To remove the lid, turn it in an anticlockwise direction.
6. Position the cover of the mixer drive (19) on the base of the machine so that
the
arrow is pointing to the circular
(3) or the mixer drive cover (19) clockwise until the
mark on the base of the machine.
Double Safety System: The motor can only be switched on if the bowl is correctly
locked in place with the lid and at the same time the mixing vessel or the cover for
the mixer drive (19) is correctly mounted. Only remove the lid of the bowl and the
mixing vessel when the machine is switched off.
Mixer function:
•
The bowl must be fixed in place as described under section 1 and 5 (without
utensil).
30
16.04.2003 9:34 Uhr
Overview of components
Operation of machine
mark on the base. Then turn the bowl clockwise
mark on the lid is pointing to the
Seite 30
11 Grater utensil
12 Cutting utensil
13 Filler tube
14 Utensil holder
15 Metal blade
16 Plastic blade
17 Filler
18 Spatula
19 Mixer lid
20 Accessory drawer
21 Locating pin
mark of the bowl is now pointing to
arrow on the lid is in line with the
mark on the
mark on the base. Then turn the mixer
arrow is pointing to the
mark on the
Werbung
Inhaltsverzeichnis
