Commissioning; Removing The Battery Security Strips (Only Comfortel M-210); Inserting The Battery (Only Comfortel M-210) - Auerswald COMfortel M-210 Betriebsanleitung

This section describes how to commission the telephone. You
can use the telephone to make calls once the commissioning pro-
cess is complete.
Removing the Battery Security Strips
(only COMfortel M-210)
Press the battery cover and slide it downwards.
1.
Remove the battery cover.
2.
Remove the battery and then peel off the green battery secu-
3.
rity strips on the underside of the battery.

Inserting the Battery (only COMfortel M-210)

Warning: Improper or incorrect use of the batteries may
result in fire, explosions, or the release of caustic chemi-
cals which may cause serious damage to the device or
pose a risk to people.
Only use the batteries shipped with the device or recharge-
able batteries of the same type recommended by the manu-
facturer.
Press the battery cover and slide it downwards.
1.
Remove the battery cover.
2.
Insert the battery in the battery compartment with its label fa-
3.
cing upwards. Insert the battery so that its contacts touch the
COMfortel M-210/310 - Instructions V02 08/2017

Commissioning

Commissioning
37