Interrupting The Charging Process; Displayed Leds - H-tronic 1 24 25 10 Bedienungsanleitung

interruPting the chArging Process

The charging process can be interrupted at any time. Before disconnecting the
battery from the charger, always disconnect the charger from the mains first.

5. disPlAyed leds

6
leds
The device is connected to the mains and is switched on.
1
Charging mode „Bike": The maximum charging current is 1A.
2
The charging voltage is 14.3V. Trickle charging is initiated once per hour.
Charging mode „Car": The maximum charging current is 4A.
3
The charging voltage is 14.3V. Trickle charging is initiated once per hour.
Charging mode „Li-Ion": this The maximum charging current is 4A.
4
The charging voltage is 14.3V. Trickle charging is initiated once a day.
Charging mode „Snowflake": The maximum charging current is 4A. The
5
charging voltage is 14.7V. This mode is recommended for different AGM bat-
teries (observe manufacturer's instructions) or at temperatures below 5 degrees.
The charger is connected with a device (smartphone, tablet) via Bluetooth
6
„BT".
11
10
9
7 8
12
1 2 3 4 5
13
14
15
16
Automatic Charger HTC 4000BT
®
| 27