Siemens KG..F Serie Gebrauchsanleitung Seite 23

3 Setting button for the vario freezer
compartment
Press the button 3.
The set temperature is indicated on
display 6 for 5 sec.
Press the selection button repeatedly
or continuously until the desired
temperature is displayed.
The value last selected is stored.
4 super" display
Illuminates when super freezing is on.
5 alarm" display
illuminates at the same time as the
warning signal is emitted, i.e. if the
vario freezer compartment is too
warm.
The alarm" display goes out, when
the vario freezer compartment has
reached its operating temperature.
6 Temperature display for
vario freezer compartment
Indicates the current temperature for
the vario freezer compartment.
When the selection button 3 is
pressed, the set temperature is
indicated for five sec. Then the current
temperature is redisplayed.
7 freezer/vitafresh" display
illuminate, if the appliance is in
operation.
8 Temperature display for cooler
compartment
Indicates the current temperature for
the coolerr compartment.
When the selection button 9 is
pressed, the set temperature is
indicated for 5 sec.
Then the current refrigerator
compartment temperature is
redisplayed.
9 Setting button for cool room
temperature (cooler)
Press the button 9.
The set temperature is indicated on
display 8 for 5 sec. Press the selection
button repeatedly or continuously until
the desired temperature is displayed.
The value last selected is stored.
10 alarm button
Is used to switch off the temperature
warning signal and door warning
signal.
The door warning signal switches on
if the appliance door is left open for
longer than half a minute.
The temperature warning signal
switches on if the vario freezer is too
warm.
The warning signal may switch on
without any risk to the frozen food
when:
S the appliance is switched on.
S large quantities of fresh food are
placed in the freezer.
After button 10 is pressed, the
warning signal is switched off. At the
same time, the warmest temperature
will be shown on display 8 for
5 seconds.
en
23