Safety Precautions; Operating Cautions - Sony PL81 Bedienungsanleitung

Safety Precautions

Sony Manufacturing Systems Corporation products
are designed in full consideration of safety. However,
improper handling during operation or installation is
dangerous and may lead to fire, electric shock or other
accidents resulting in serious injury or death. In
addition, these actions may also worsen machine
performance.
Therefore, be sure to observe the following safety
precautions in order to prevent these types of
accidents, and to read these "Safety Precautions"
before operating, installing, maintaining, inspecting,
repairing or otherwise working on this unit.
Warning Indication Meanings
The following indications are used throughout this
manual, and their contents should be understood
before reading the text.
Warning
Failure to observe these precautions may lead to fire,
electric shock or other accidents resulting in serious
injury or death.
Caution
Failure to observe these precautions may lead to
electric shock or other accidents resulting in injury or
damage to surrounding objects.
Note
This indicates precautions which should be observed
to ensure proper handling of the equipment.
Warning
• Do not use this unit with voltages other
than the specified supply voltage as this
may result in fire or electric shock.
• Do not perform installation work with wet
hands as this may result in electric shock.
• Do not disassemble or modify the unit as
this may result in injury or damage the
internal circuits.
ii
Caution
• Be sure to check the machine and device
conditions to ensure work safety before
working on the machine.
• Be sure to cut off the power supply, air and
other sources of drive power before
working on the machine. Failure to do so
may result in fire or accidents.
• When turning on the power supply, etc. to
operate the machine, take care not to
catch your fingers in peripheral machines
and devices.

Operating Cautions

• Do not open the cover of this device or put your
hand inside. Otherwise the internal circuit may be
broken by static electricity.
• This device is not explosion-proof. Do not use it in
the atmosphere of flammable gas.
• This device is not vibration resistant. Do not use it in
place where it is subject to shocks. (Excluding the
head assembly)
I General precautions
W h e n u s i n g S o n y M a n u f a c t u r i n g S y s t e m s
Corporation products, observe the following general
precautions along with those given specifically in this
manual to ensure proper use of the products.
• Before and during operations, be sure to check that
our products function properly.
• Provide adequate safety measures to prevent
damages in case our products should develop
malfunctions.
• Use outside indicated specifications or purposes
and modification of our products will void any
warranty of the functions and performance as
specified of our products.
• When using our products in combination with other
equipment, the functions and performances as
noted in this manual may not be attained, depending
on operating and environmental conditions.