1. Outline
1-1. Main Features
1-2. Installation Location
1-3. Name of Each Part
Head unit
12
This product is a position detector unit for DIGIRULER that incorporates a head and a
detector. When used together with a separately purchased scale unit (SL110/130
series), this unit detects the movement amount over a straight line and outputs a pulse
signal (A/B phase).
• The head unit does not contact the scale unit, providing excellent resistance to the
working environment.
• Resistance to external magnetic fields and fluctuations in head clearance results in
high accuracy.
• Minimum resolution: 10 µm
• This product should be used within an ambient temperature range of 0 to +45°C (32 °
to 113 °F), and should not be exposed to direct sunlight or heat sources.
• During operation, be sure to keep the unit 0.5 m or more away from large power
relays, high voltage or large current switches, or other sources of noise.
• Wire the head cable and output cable separately from power lines.
• When coupling relays, solenoids, motors or other devices to this unit, be sure to take
measures to prevent noise.
• Be sure to earth the detector main unit.
Head cable
Detector unit
Output cable
Output connector
(supplied)