Eaton Axxium Pro 9910 Installationsanleitung Seite 13

Axxium Pro 9910 Installation Guide for IBM Applications
t
3. Connect one of the supplied communication cables to the UPS
communication port according to your computer system:
Use the supplied AS/400 communication cable.
For the AS/400.
S
The "AS/400" end of the cable connects to the port marked
"J14" or "UPS" on the AS/400 rear panel.
For PCs and workstations.
S
supplied with the power management software CD.
J14 or
UPS
AS/400
Figure 6. Connecting the Interface Cable
4. Plug your equipment into the appropriate UPS output
receptacles using the equipment power cords supplied with the
UPS.
DO NOT protect laser printers with the UPS because of the
exceptionally high power requirements of the heating elements.
LTM-1341 A Uncontrolled Copy
S
Use the communication cable
Axxium Pro
Installation
9