Eaton Axxium Pro 9910 Installationsanleitung Seite 11

Axxium Pro 9910 Installation Guide for IBM Applications
t
7. Connect the UPS to utility power.
Models B42 and B46.
14-50 receptacle [single-phase, 4-wire (two hot, a neutral, and a
ground), 200V, 208V or 240V input circuit]. This receptacle
must be located within reach of the model's input power cord.
The circuit breaker must be within sight of the system or
conform to lock-out, tag-out guidelines (see Table 5).
Table 5. Circuit Breaker Sizing
Model
B42 and B46
B43 and B47
LTM-1341 A Uncontrolled Copy
S
Figure 4. Inserting the Modules
Requires the installation of a NEMA-type
Input Voltage
200V, 208V, 240V
200V, 220V, 230V, 240V
Installation
Circuit Breaker
50A
6 kVA: 50A
9 kVA: 70A
7