Overview - Sonnenkraft SKSRDL2 Handbuch

1. Overview

• Visualisation of system states
• Yield control
• Easy configuration by integrated web interface
for standard internet browsers
• Optional SD card
• Export function for further data processing in
spreadsheet programs
• Direct connection of PC or router for remote
access
This additional module enables the acquisition and storage
of large amounts of data (such as measuring and balance
values of the solar system) over a long period of time. The
SKSRDL2 can be configured and read-out with a standard
internet browser via its integrated web interface. For trans-
mission of the data stored in the internal memory of the
SKSRDL2 to a PC, an SD card can be used.
The SKSRDL2 is appropriate for all controllers with VBus
It can be connected directly to a PC or router for remote
access and thus enables comfortable system monitoring for
yield monitoring or for diagnostics of faults.
Technical data
Housing:
Plastic PC-ABS and PMMA
Protection type: IP 20 / DIN 40050
Ambient temperature: 0 ... 40 °C
Dimensions: Ø130 mm,
depth 45 mm
Mounting: wall mounting
Display: Bar LED for monitoring the
memory capacity, 1 illuminated push-
button for presentation of the SD
card status
Interfaces: VBus for connection
®
to controllers. Ethernet (LAN), Auto
MDIX 10/100 Base TX
Power consumption: 1,75 W
® .
Power supply:
Input voltage of mains adapter:
100 ... 240 V
Rated current: 350 mA
Input voltage of Datalogger:
5V DC ± 5 %
Memory: 180 MB internal memory
B
Included with the SKSRDL2:
• Datalogger SKSRDL2, ready to
plug in, with mains adapter and
VBus -cable
®
• Network cable, 1 m
•
Wall plugs and screws
• Screw terminal (for extending the
VBus ® -cable)
SKSRDL2
15