Description Of Symbols; Information About The Product - Sonnenkraft SKSRDL2 Handbuch

Table of contents

Description of symbols ...........................................14

Disposal ....................................................................14

Information about the product ..............................15

1. Overview .....................................................15
2. Installation ...................................................16
2.1 Mounting ...................................................................... 16
2.2 Connection ................................................................. 16
3. Operation ....................................................17
4. Data transfer ...............................................17
5. Display ..........................................................17
5.1 Status LED ................................................................... 17
5.2 Fill level of data memory ......................................... 18
6. Connecting the datalogger ........................18
Safety advice
Please pay attention to the following safety advice in order
to avoid danger and damage to people and property.
Attention should be paid to
•
the statutory provisions for prevention of industrial
acci dents,
•
the statutory provisions for environmental protection,
• the Health and Safety at Work Act 1974
• Part P of the Building Regulations 2005
•
BS7671 Requirements for electrical installations and
relevant safety regulations
Description of symbols
WARNING!
Warnings are indicated with a
warning triangle!
Signal words describe the danger that may occur, when it
is not avoided.
• Warning means that injuries or even danger of life
can occur.
Note
Notes are indicated with an information symbol.
Arrows indicate instruction steps that should be
«
carried out.
Disposal
• Dispose of the packaging in an environmentally sound
manner.
• Dispose of old appliances in an environmentally sound
manner. Upon request we will take back your old appli-
ances bought from us and guarantee environmentally-
friendly disposal of the devices.
SKSRDL2
14
7. Quickguide Configuration .........................19
8. Start screen web interface SKSRDL2 ......... 19
8.1 State .............................................................................. 20
9. Data ............................................................................. 21
10. Configuration ......................................................... 22
10.1 Configuration: General ............................................. 22
10.2 Configuration: Network ........................................... 23
10.3 Configuration: Time ................................................... 23
10.4 Configuration: Firmware Update ........................... 23
10.5 Configuration: Remote Access ............................... 23
10.6 About SKSRDL2 ........................................................ 23
Imprint ...................................................................................... 60
These instructions are exclusively addressed to authorised
skilled personnel.
•
Only qualified electricians should carry out electrical
works.
•
Initial installation must be effected by qualified person-
nel named by the manufacturer
This manual contains important information about safe and
proper usage of this product. Please keep this manual for
future reference.
Subject to technical change. Errors excepted.
Information about the product
Proper usage
The datalogger SKSRDL2 may only be used in conjunction with
controllers with VBus output in order to log and access data in
®
compliance with the technical data specified in this manual.
Improper use excludes all liability claims.
Declaration of conformity
The product complies with the relevant
directives and is therefore labelled with the
CE mark. The Declaration of Conformity is
available upon request, please contact the
manufacturer.
B