Legacy Whirlpool INT Enterprise SE Handbuch Seite 55

Spa Controls
Sensor Related Messages
SENSOR BALANCE IS POOR
The temperature sensors MAY be out of sync by 2°F or 3°F. Call for Service.
SENSOR BALANCE IS POOR*
The temperature sensors are out of sync. The Sensor Balance is poor fault has been established for
at least 1 hour. Call for Service.
SENSOR FAILURE – SENSOR A, SENSOR B
A temperature sensor or sensor circuit has failed. Call for Service.
Miscellaneous Messages
NO COMMUNICATIONS
The control panel is not receiving communication from the System. Call for Service.
°F OR °C IS REPLACED BY °T
The Control System is in Test Mode. Call for Service.
* This message can be reset from the topside panel with any button press.
DO NOT DIVE. 53