Spa Controls; Main Menus; Navigation - Legacy Whirlpool INT Enterprise SE Handbuch

Spa Controls

Main Menus

Panels that have two Temperature buttons (Warm and Cool) can use both of them to simplify
navigation and programming where a single Temperature icon is shown.
The LIGHT Button is also used to choose the various menus and navigate each section.
Typical use of the Temperature button(s) allows changing the Set Temperature while the numbers
are flashing in the LCD. Pressing the LIGHT button while the numbers are flashing will enter the
menus.
The menus can be exited with certain button presses. Simply waiting for several seconds will return
the panel operation to normal.
Power-up Screens
Each time the System powers up, a series of numbers is displayed.
After the startup sequence of numbers, the system will enter Priming Mode
Main Screen
DO NOT DIVE.

NAVIGATION

Navigating the entire menu structure
is done with 2 or 3 buttons on the control
panel.
Some panels have separate WARM (Up)
and COOL (Down) buttons, while others
have a single Temperature button. In the
navigation diagrams Temperature buttons
are indicated by a single button icon.
While the Temperature is
still flashing, press Light.
45
Main Screen
Waiting Several Seconds in the Main Menu
will allow the display to revert to the Main Screen.
Most changes are not saved unless Light
Refer to Key above.
is pressed.