Legacy Whirlpool INT Enterprise SE Handbuch Seite 14

GLOSSARY OF SPA TERMINOLOGY
9. PERSONAL REMOTE CONTROL
Select spa models may have an additional remote which allows the user to control the jet
therapy while remaining in the seat (if applicable). By pressing the control one time, you will
activate the pump. Press again for high speed and again to turn it off.
10. EQUIPMENT ACCESS PANEL
This is the skirt panel located below the Topside Control Panel. This area houses the major-
ity of components responsible for the spas operation. These components include the pumps,
heater, spa control system, ozonator (if equipped), and LED light system (if equipped). Pump
and equipment placement may vary by model.
11. ACCESS PANELS
These are the skirt panels located around all four sides of the spa. All of the skirt panels are
removable should service be required. Master Spas recommends at least 3 feet of access be
provided around the spa.
12. FILTER LID
This lid fits over the filter area and weir gate to cover the filters. Remove filter lid to access
filters for maintenance.
14. WEIR GATE
The weir gate is the horizontal door located in front of the filters that helps keep debris
trapped in the filter area
15. SPA CONTROL SYSTEM
This houses the wiring and electrical components necessary to operate the spa.
16. SPA HEATER
This is an electric heater housed in a stainless steel tube. It is thermostatically controlled and
equipped with high-limit temperature safety shut-off sensors.
Slice Valve and Pump Union
DO NOT DIVE. DO NOT DIVE.
(if equipped)
17. SLICE VALVES
These valves are used by service personnel to shut off water
to the heating system (heater and pump plumbed to the
heater) so that the spa water does not need to be drained
if the spa requires service to the heating system (varies by
model).
NOTE: Slice valves must be completely open during normal
operations.
101 12