Glossary Of Spa Terminology - Legacy Whirlpool INT Enterprise SE Handbuch

GLOSSARY OF SPA TERMINOLOGY

Your new Master Spa features a variety of jets. All jets, regardless of style return the water to the
spa. Air is mixed with the water by using the air controls (if equipped) creating a gentle to most
vigorous massage. Water flow is adjusted by simply turning the outer face of the jet. Your Master
Spa may have a combination of pulsating, rotating, dual pulsating and directional adjustable jets.
1. THERAPY JETS
Located throughout the seats of the spa to offer a variety of therapy combinations.
2. NECK JETS
(if equipped)
Located above the normal water level to provide massaging action to the back of the neck.
3. SHOULDER JETS
Located above the normal water level to provide massaging action to the shoulders.
4. MASTER BLASTER FOOT THERAPY JET
Large jet with several fixed nozzles located in the bottom of the spa near the floor to provide
excellent massage to the feet.
5. JET DIVERTER VALVE
Located on the top flange of the spa, this large valve physically diverts the flow of water from
one group of jets to another. Be sure that no sand or particles are brought into the spa as they
will cause the diverter to seize up. It is best to turn the diverter valve only when the pump is
turned off.
6. WATER FEATURE VALVE
Located on the top flange of the spa, this smaller valve adjusts water flow to the waterfalls and/
or water features in your spa.
NOTE: When the spa is not in use, this valve should be turned mostly shut (not completely shut)
to prevent the water features from allowing water to hit the cover while it is closed. If
left mostly open, water may hit the cover and possibly run out of the spa causing water
loss.
7. AIR CONTROL VALVE
These smaller valves are located around the top of your spa. You may increase or decrease the
force of your jets by opening or closing the air control valves. Each air control valve will typi-
cally function 1 to 2 groups or seats of jets in the spa. When not in use the air controls should
be kept in the closed position as the air being introduced in to the water can tend to cool the
water and increase the dissipation rate of sanitizer levels.
8. TOPSIDE CONTROL PANEL
You may safely control spa functions from inside or outside your spa using the Topside Control
Panel. This Panel is used to control the water temperature, pumps, the spa light, automatic
filtration cycles and other advanced functions. The digital display will give you a constant tem-
perature readout and will notify you in case of certain malfunctions. Several user programmable
functions are also available.
DO NOT DIVE. DO NOT DIVE.
(if equipped)
(if equipped)
(if equipped)
(if equipped)
100 11