Werbung
Using the buttons ´"+" (I) and "-" (N) on the rear of the
multi-compass, the 9 interim times stored first can now
be displayed. If you have taken more than 9 interim
times, these cannot be displayed.
Example: you have taken 15 interim times. Only the inter-
im times 1-9 are stored.
• If the stopwatch has been stopped, the display can be
reset using the button "SPLIT/CLEAR" (C) to "00:00:00".
At the same time all interim times which may have been
stored are deleted.
l) Setting the display unit for the barometer
• Press the button "MODE" (D) so often until "BARO"
(Barometer) appears briefly in the lowest line of the dis-
play.
• To select the unit for the display (HPA = hectopascal or
mBa = milli-bar), press the button briefly
58
A L
ifted cover (on the rear are the brief English Brief
instructions for calibrating the compass)
H Button "RESET"; countersunk, for resetting the multi-
compass (all settings are deleted)
I Button "MONTH/HR +"
• Setting for date/time
• "+" setting for diverse features
J Rotary switch for selecting the alarm feature
"SNOOZE":
alarm feature activated with
slumber mode
"ALARM ON":
alarm feature activated
"ALARM OFF": alarm feature deactivated
K Covering for battery compartment (to open, turn in anti-
clockwise direction)
L Button "°C/°F POWER ON/OFF"
• Press button down for more than 2 seconds. ON/OFF
• Press button briefly: switch-over between °C and °F
M Button "YEAR 12/24"
• Setting for date
• Change-over between 12/24h mode
N Button "DATE/MIN -"
• Setting for date/time
• "-"-Setting for diverse features
47
Werbung
Kapitel
