Intended Use; Product Features; Technical Data - Bosch PTA 2400 Originalbetriebsanleitung

OBJ_BUCH-940-002.book Page 16 Tuesday, June 9, 2009 1:44 PM
16 | English

Intended Use

The saw stand is intended exclusively for mount-
ing the following stationary Bosch saws (as of
2009.05):
– PCM 7 3 603 M01 2..
– PCM 8 S 3 603 L02 0..
– PCM 10 3 603 L01 0..
Together with the power tool, the saw stand is
intended for the cutting to length of boards and
profiles.

Product Features

The numbering of the product features refers to
the illustration of the saw stand on the graphics
pages.
1 Attachment set
2 Retaining adapter
3 Locking pin of the saw stand legs
4 Height-adjustable leg
5 Locking knob of the attachment set 1
6 Length stop
7 Locking knob of the length stop 6
8 Workpiece support
9 Locking knob of the workpiece support 8
10 Table extension
11 Locking pin of the table extension 10
12 Fastening kit, retaining adapter
13 Fastening kit, power tool
14 Lock nut
15 Fastening hole
16 Assembly-sliding plate
17 Locking knob of the table extension 10
18 Adjustment screw of the attachment set 1
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
1 609 929 T64 | (9.6.09)

Technical Data

Saw stand
Article number
Length of saw stand
without table extension
Length of saw stand
with table extension
Height of saw stand
Max. carrying capacity
(power tool + work-
piece)
without table extension
– Attachment set
Max. carrying capacity
(power tool + work-
piece)
with table extension
– Attachment set
– Per table extension
Weight according to
EPTA-Procedure
01/2003
PTA 2400
3 603 M05 0..
mm 1220
mm 2440
mm 820
kg 160
kg 110
kg 25
kg 20.4
Bosch Power Tools