Regulations, Standards, Guidelines - AEG Electrolux S86348-KG Gebrauchsanweisung

Frost build internal parts.
The compressor runs continuously
Noise
The compressor does not start
immediately after changing the
temperature setting.
If after the above checks there is still a fault, call your local AEG-
Electrolux Service Force Centre.
In-guarantee customers should ensure that the above checks have been
made as the engineer will make a charge if the fault is not a
mechanical or electrical breakdown.
Please note that proof of purchase is required for in-guarantee service
calls.

Regulations, Standards, Guidelines

This appliance was designed for household use and was manufactured
in accordance with the appropriate standards. The necessary measures
in accordance with appliance safety legislation regulations (GSG),
accident prevention regulations for refrigeration appliances (VBG 20)
and the regulations of the German Society of Electrical Engineers (VDE)
were observed in the manufacture of this appliance.
The refrigerant circuit has been checked for leaks.
818 42 71-00/8
Symptom Solution
Check that the doors are closed and that
the insulating strip is complete and clean.
Adjust the temperature to give correct
temperature control.
Check that the doors are closed.
Large quantities of food have recently
been placed in the cabinet and/or door is
frequently opened.
Check that air ventilation is not
obstructed.
Refer to Normal Operating Sounds
This is normal, the compressor starts after
a period of time.
87