Fitting The Door Handles - AEG Electrolux S86348-KG Gebrauchsanweisung

3. Wash the inside of the appliance with lukewarm water with a little
bicarbonate of soda added (5 ml to 0.5 litre of water). Do not use soap
or detergent as the smell may linger. Dry the appliance thoroughly.
Remove the transport fittings from
the storage shelves:
4. Slide the fittings securing the shelf
forward to the thicker section on the
edge of the storage shelf.
5. Take hold of the storage shelf at the
back and together with the fittings
slide the storage shelf far enough for-
ward so that it can be hinged down-
wards and the fittings can be removed
from the guides.

Fitting the Door Handles

To keep the amount of packaging down and to reduce the size for
transporting, the door handles are not mounted when the appliance is
delivered.
1
Take care! Do not tighten screws too tightly (max. 2 Nm), the door
handles could be damaged.
The handles are packed separately on the padding in front of the door,
the brackets and screws inside the appliance.
To mount, lay the appliance carefully on its back, if necessary. Use a
piece of padding or a blanket as protection under the appliance.
0 1. Screw the top door bracket to the
door handle (1). Mount the
bottom door bracket to the
bottom of the door (2).
Important: Ensure door handle is
correctly positioned
2. Mount top door bracket on the
top of the door (3) and screw
handle to bottom door bracket
(4).
818 42 71-00/8
54