Waeco SinePower MSP 702 Bedienungsanleitung Seite 41

SinePower
NOTE
I
Note when connecting devices with an electrical drive (such as
power drills and refrigerators), that they often require more power
than is indicated on the type plate.
The inverter has various protective mechanisms.
 High voltage shutdown: The inverter shuts itself off when the voltage
exceeds the cut-off value. It restarts when the voltage returns to the re-
start value.
 Low voltage shutdown: The inverter shuts itself off when the voltage
sinks below the cut-off value. It restarts when the voltage rises to the re-
start value.
 High temperature shutdown: The inverter switches off when the temper-
ature inside the device or the temperature on the cooling element exceeds
a cut-off value. It restarts when the temperature returns to the restart value.
NOTE
I
The individual values are found in "Technical data" on page 55.
The inverter can be switched into an energy saving mode (Standby), so that
the battery connected to the inverter does not discharge too quickly.
The inverter can be connected to an exhaust system with the included ex-
haust adapter. This allows the warm exhaust to be diverted outside.
The connection cable can be attached to the back of the device via the cable
socket.
The inverter can be turned on and off with an external switch (not included in
package).
The manufacturer offers a remote control as an accessory for the inverter.
EN
Technical description
41