Starting Operation; Function; Install/Replace The Batteries; Switch On - DNT M-Voice100 Bedienungsanleitung

Function

2 different recording modes:
standard play (64 min) and long play (108 min)
128 messages in 3 files individually selectable
Recording with VOS (voice operating system)
Automatic numbering of the message
Pause function
Hold function
External jack for earphone
Auto power off when not in use
Adjustable microphone sensitivity (6 steps)
Internal omnidirectional microphone
lnstall/replace the batteries
Before you install/replace the batteries press the REC/STOP-
button.
To open the battery door push the battery door and slide it into
the arrow direction.
Install two AAA (Micro)-batteries into the battery compartment.
Pay attention to polarity of the batteries +/- and close the battery
door.

Switch on

Make sure that the HOLD-switch is in off position and press any
button to switch on the unit.

Check the remaining battery capacity

Switch the unit on and watch the battery symbol at the display.

Features

Battery full
- 21 -

Starting operation

Battery empty