Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Safety precautions
This product complies with the requirements of the following
European Community Directives: 2004/108/EC (Electromagnetic
Compatibility) and 2006/95/EC (Low Voltage) as amended by
2004/22/EC (CE-Marking).
Overvoltage category III 600V; pollution degree 2.
CAT I:
For signal level, telecommunication, electronic with
small transient over voltage
CAT II:
For local level, appliances, main wall outlets, portable
equipment
CAT III: Supplied from a cable under earth; fixed installed
switches, automatic cut-off or main plugs
CAT IV: Units and installations, which are supplied overhead
lines, which are stand in a risk of persuade of a
lightning,
i.e.
main-switches
overvoltage-diverter, current use counter.
To ensure safe operation of the equipment and eliminate the
danger of serious injury due to short-circuits (arcing), the
following safety precautions must be observed.
Damages resulting from failure to observe these safety
precautions are exempt from any legal claims whatever.
*
Do not use this instrument for high-energy industrial
installation measurement.
*
Do not place the equipment on damp or wet surfaces.
*
Do not exceed the maximum permissible input ratings
(danger of serious injury and/or destruction of the
equipment).
*
Check test leads and probes for faulty insulation or bare
wires before connection to the equipment.
*
To avoid electric shock, do not operate this product in wet or
damp conditions. Conduct measuring works only in dry
clothing and rubber shoes, i. e. on isolating mats.
*
Never touch the tips of the test leads or probe.
on
current
-9-
input,
Werbung
Inhaltsverzeichnis
