Specification - Gossen MetraWatt CP 30 Bedienungsanleitung

1_CP C
Operating Instructions
CP 30
3-349-600-37
CP 330
6/11.16
CP 1100
CP 1800
AC/DC current probe
CP 330
CP 1800
Order Reference Order No.
CP 30 Z201B
CP 330 Z202B
CP 1100 Z203B
CP 1800 Z204A
Battery is included.
Thank you for buying this product. For safety reasons
and optimum use of this instrument read through the
operating instructions very carefully.
1. SAFETY
The following symbols appear on the products:
Do not dispose of this product as unsorted
municipal waste. Contact a qualified recycler for
.
disposal
Attention! Refer to Manual
Double/Reinforced Insulation
Application around and removal from
HAZARDOUS LIVE conductors is
permissible
Complies with the relevant European
Complies with the relevant European standards
standards.
Read the operating instructions completely
and carefully before placing your instrument
into service, and follow all instructions
contained therein.
To avoid electric shock:
• Use caution during installation and use of this
product; high voltages and currents may be present
in circuit under test.
• This product must be used only by qualified
personnel practising applicable safety precautions.
• Do not use product if damaged.
• Always ensure the probe is removed from any live
electrical circuit, before removing the battery cover.
• Do not hold the probe anywhere beyond the tactile
barrier see FIG 1, in order to avoid dangerous
contact with the conductor.
3-349-600-37 6/11.16
2. INTRODUCTION
The CP 30, CP 330, CP 1100 and CP 1800 AC/DC
current probe have been designed for reliable and
accurate, non-intrusive measurement of AC, DC and
complex waveform currents.
Using advanced Hall Effect technology the CP 30,
CP 330 and CP 1100 can measure currents accurately
up to 30 Amps (CP 30), up to 450A (CP 330), up to 1400A
(CP 1100) and up to 1800A (CP 1800).
Measurement features include:
AC and DC current measurement
High accuracy
1mA / 50mA / 100 mA Resolution
Auto Power Off
These features make it a powerful tool for use in inverters,
switch mode power supplies, industrial controllers and
other applications requiring current measurement and/or
waveform analysis.

3. SPECIFICATION

3.1 Electrical data
(All accuracies stated at 23°C ± 1°C)
CP 30 (Z201B)
Measuring range ....................... 0 to 30A DC or ACpk
Current Range .......................... 30A
Resolution ................................. 1mA
Overload capacity (60s) ............ 500A
Basic accuracy (DC...300Hz) ... ±1% of rdg ±2mA
Temperature Coefficient ........... ±0.01% of reading/°C
Frequency range ....................... DC to 20kHz (-1dB)
CP 330 (Z202B)
Measuring range ....................... 0 to 450A DC or ACpk
Current Ranges......................... 30A / 300A
Resolution ................................. 10mA / 100mA
Overload capacity (60s) ............ 600A
Basic accuracy (DC...300Hz) ... ±1% of rdg ±50/100mA
Frequency range ....................... DC to 20kHz (-3dB)
CP 1100 (Z203B)
Measuring range ....................... 0 to 1400A DC, ACpk
Current Ranges......................... 100A / 1000A
Resolution ................................. 100mA / 500mA
Overload capacity (60s) ............ 2000A
Basic accuracy (DC...300Hz) ... ±1% of rdg ±100/500mA
Frequency range ....................... DC to 20kHz (-3dB)
CP 1800 (Z204A)
Measuring range ....................... 0 to 1800A DC, ACpk
Current Ranges......................... 125A / 1250A
Resolution ................................. 100mA / 500mA
Overload capacity (60s) ............ 2000A
Basic accuracy (DC...300Hz) ... ±1% of rdg ±100/500mA
Frequency range ....................... DC to 20kHz (-3dB)
3.2 General data
Overall DC accuracy .................. ±1% of rdg
Working voltage ......................... 300V ACRMS or DC
Operating temperature .............. 0°C to +50°C
Storage temperature with
battery removed ......................... -20°C to +85°C
Power supply ............................. 9 V Alkaline battery
................................................... PP3, MN 1604
................................................... or IEC6LR61
Battery life .................................. 30 hours (typical)
Output connection: .................... 1.5m cable with 4mm
safety connectors
Conductor size ........................... 25 mm diameter
CP 1100, CP 1800 ..................... 32 mm diameter
Weight ........................................ 320 g
Dimensions (H, W, D) ................ 194 x 74 x 25mm
CP 1100, CP 1800 ..................... 200 x 74 x 25mm