Acoustic Signals - ZANKER KDT10042FK Benutzerinformation

Deactivating the rinse aid empty notification
While the appliance is in user mode:
1. Press .
• The indicators
• The indicator
• The indicator
(factory setting).
2. Press to change the setting. The indicator
3. Press the on/off button to confirm the setting.

Acoustic signals

Acoustic signals sound when a malfunction of the
appliance occurs. It is not possible to deactivate these
acoustic signals.
Activating the acoustic signal for the end of programme
By default this acoustic signal is deactivated but it is possible to activate it.
While the appliance is in user mode:
1. Press .
• The indicators
• The indicator
• The indicator
2. Press
to change the setting. The indicator
3. Press the on/off button to confirm the setting.
, and go off.
continues to flash.
indicates the current setting: the indicator
, and go off.
continues to flash.
indicates the current setting: the indicator
on = Rinse aid empty notification activated
off = Rinse aid empty notification deactivated.
There is also an acoustic signal that sounds when the
programme is completed. By default this acoustic signal
is deactivated but it is possible to activate it.
off = Acoustic signal off.
on = Acoustic signal on.
9