Treatment Procedure; After Treatment - Philips PSK0101/10 Bedienungsanleitung

7 Fold the Philips BlueControl securing sling over the Philips
BlueControl (1). Then secure the Philips BlueControl by fastening the
Velcro strip on the end of the sling onto the Velcro strip on the strap (2).

Treatment procedure

1 Press the on/off button to switch on the Philips BlueControl.
Caution: Never look directly into the light source during use.
Do not intentionally touch the sensor in the centre of the Philips
BlueControl when it is switched on.
Do not cover the Philips BlueControl when it is switched on.
2 The Philips BlueControl flashes blue to indicate that it is ready
for treatment. The treatment starts soon after the sensor detects
the psoriasis plaque to be treated.
The LED indicator lights up solid blue and a sequence of two tones
,
indicates the Philips BlueControl is in progress.
3 The Philips BlueControl automatically switches off after the
treatment time (approximately 30 minutes) has elapsed.
Interrupting treatment
1 If you want to interrupt the treatment briefly, simply remove the
Philips BlueControl or press the on/off button to switch it off.
Note: If you remove the Philips BlueControl or press the on/off button to stop
treatment before the treatment time has elapsed and you do not resume the
treatment within 2 hours, the timer automatically resets. If you resume the
treatment within 2 hours, the countdown of the treatment time wil continue
where it left off.

After treatment

Treatment ends automatically after the treatment time has elapsed, unless
you remove the Philips BlueControl or press the on/off button to stop
treatment earlier.
Note: A sequence of two different tones indicates that the Philips BlueControl
switches off and treatment has ended.
ENGLISH
11