Gastroback 40975 DESIGN STABMIXER ADVANCED PRO Bedienungsanleitung Seite 36

5. Choose the speed with the variable control switch.
6. Connect the power plug to a suitable wall power outlet.
7. Hold on to the chopper vessel with one hand and press the ON-button to start
the motor.
Do not use the appliance with the chopper attachment in continuous ope-
CAUTION:
ration for more than 1 minute to avoid overheating. If processing large quantities of
food, regularly interrupt the operation and unplug the appliance for a few minutes,
allow the motor to cool down.
8. Chop your food to the desired quality, but at least after 1 minute of continuous
operation release the ON-button.
9. Wait until the motor stops. Always unplug the appliance immediately after ope-
ration or before assembling/disassembling the tools. By pressing both release-but-
tons remove the motor block from the chopper attachment and place the motor block
on a suitable surface, where it cannot fall.
WARNING: Always release the ON-button, wait until the motor stops complete-
ly and unplug the appliance before assembling or dismantling the tools.
10. Clean the appliance in accordance to the instructions in chapter ›Care and clea-
ning‹. Do not leave any food to dry on the surface of the appliance.
Processing guide for the chopper attachment:
food
meat
herbs
nuts
cheese
bread
onions
biscuits
soft fruit
36
max. amount
250 g
50 g
100 g
100 g
80 g
150 g
150 g
200 g
max. operation
8 sec
8 sec
8 sec
5 sec
5 sec
8 sec
6 sec
6 sec