Using The Stainless Steel Blender - Gastroback 40975 DESIGN STABMIXER ADVANCED PRO Bedienungsanleitung

USING THE STAINLESS STEEL BLENDER

The hand blender is perfectly suited for preparing dips, sauces, soups,
mayonnaise and baby food as well as for mixing and milkshakes.
WARNING:
stops and unplug the appliance before lifting the blending tool out of
the food, laying down the appliance or assembling/dismantling the
blending tool.
Before connecting the appliance to the mains power supply, always
ensure that the appliance is assembled correctly, according to the fol-
lowing instructions. Do not touch the blades of the blending tool with
your hands or any objects (i.e. hair, clothes, tissue), when it is moun-
ted and the appliance is connected to the mains power supply. Before
pressing the ON-button, immerse the processing tool in the food (up to
A
the half of its height at most), to avoid excessive splashing and drip-
ping of liquids onto the appliance.
1. Prepare your food and fill it into a sufficiently large and high-sided
vessel (like the vessel provided).
WARNING:
temperature is 70 degrees. Let the boiling food cool down a little bit
before starting to blend.
2. Ensure, that the appliance is unplugged.
3. Place the shaft of the stainless steel blender onto the motor block
and press together until it snaps into place (see picture A). There may
be no gap between the motor housing and the stainless steel blender.
The blender shaft must be locked firmly and may not wobble (see pic-
ture B).
B
4. Immerse the stainless steel blender into the food. Choose the speed
with the variable control switch. It is to be expected, that the food will splash duri-
ng operation. When processing hot meals, do not hold the appliance in the rising
steam to avoid condensation on the motor housing. Immediately wipe off condensate
on the motor housing. The lower part of the stainless steel blender should be always
covered with food to avoid splashing.
Note:
Process food with a sufficient amount of liquid.
5. Connect the power plug to a suitable wall power outlet.
6. Hold on to the vessel with one hand and press the ON-button to start the motor.
30
Always release the ON-button, wait until the motor
The provided vessel is not heat resistant. The max.