Description And Functions - Conrad FS20 IRP Bedienungsanleitung

6. Description and functions

The "FS20 IRP" simplifies programming and handling of an FS20 radio switching system with
the comfortable configuration of suitable FS20 transmitters via a PC software.
The "FS20 IRP" converts the data received from a PC via a USB interface into infrared signals,
which can be received by the corresponding FS20 transmitters.
This omits the complex programming via different key combinations. Each key can be
programmed individually via the PC software.
It is also possible to program macros with at most 3 actions. The settings can be saved for future
use in a file, e.g. for transmission to other FS20 transmitters. This file can be edited at wish later
on.
Overview of compatible FS20 transmitters (the extension "-2" new versions)
• FS20 S20-2
• FS20 SR
• FS20 S8-2
• FS20 SPIR
• FS20 S4U
• FS20 PIRI
• FS20 S4M
• FS20 SD
• FS20 S4A-2
• FS20 S20-3 (is delivered as ready-to-use device with already equipped IR reception diode)
29