Wiring Connection - Kenwood DPX-7000DAB Bedienungsanleitung

INSTALLATION / CONNECTION

Wiring connection

When connecting to an external amplifier, connect its ground wire to the car's chassis to
avoid damaging the unit.
If your car does not have an ISO terminal :
We recommend installing the unit with a commercially available custom wiring harness
specific for your car and leave this job to professionals for your safety. Consult your car audio
dealer.
Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall)
automobiles
You may need to modify the wiring of the supplied wiring harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
30
ISO connectors
Ignition wire (Red)
Unit
Battery wire (Yellow)
Pin Color and function
: Battery
A4 Yellow
: Power control
A5 Blue/White
: Ignition (ACC)
A7 Red
: Earth (ground) connection
A8 Black
B1 Purple ]
: Rear speaker (right)
Purple/black [ For 3-way crossover: Tweeter (right)
B2
Gray ]
B3
: Front speaker (right)
For 3-way crossover: Mid range speaker (right)
Gray/black [
B4
B5 White ]
: Front speaker (left)
For 3-way crossover: Mid range speaker (left)
B6 White/black [
Green ]
B7
: Rear speaker (left)
For 3-way crossover: Tweeter (left)
Green/black [
B8