Wiring Connection - Kenwood KDC-4754SD Bedienungsanleitung

Wiring connection

Light blue/yellow
(Steering remote control wire)
Blue/White
(Power control wire/ Antenna
control wire)
Brown
(Mute control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
ISO connectors
Pin Color and function
A4 Yellow Battery
A5 Blue/White Power control
A7 Red Ignition (ACC)
A8 Black Earth (ground) connection
Subwoofer output terminals
Front output terminals
R L
Rear output terminals
Antenna terminal (JASO)
STEERING WHEEL
REMOTE INPUT
To the steering wheel remote control adapter
REMOTE CONT
ANT CONT
To the power control terminal when using the optional power
amplifier, or to the antenna control terminal in the vehicle.
P. CONT
To the terminal that is grounded when either the telephone rings
or during conversation. (To connect the Kenwood navigation
MUTE
system, consult your navigation manual.)
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
Ignition wire
Unit
Battery wire
Pin
B1 / B2 Purple
ª
B3 / B4 Gray
B5 / B6 White
B7 / B8 Green
Rear/subwoofer output
R L
terminals
(Red)
(Yellow)
Default wiring
Color and function
ª / Purple/black · Rear speaker (right)
·
/ Gray/black Front speaker (right)
ª / White/black · Front speaker (left)
ª ·
/ Green/black Rear speaker (left)
Fuse (10 A)
A7 (Red)
Vehicle
A4 (Yellow)
19