Küppersbusch IKE3180-3 Benutzerinformation Seite 48

48
ca. 50 mm
ca. 50 mm
13. Push the part (Hc) on the part (Ha).
Ha
Hc
14. Open the appliance door and the
kitchen furniture door at an angle of
90°.
15. Insert the small square (Hb) into guide
(Ha).
16. Put together the appliance door and the
furniture door and mark the holes.
8 mm
Hb
17. Remove the brackets and mark a
distance of 8 mm from the outer edge
of the door where the nail must be fitted
(K).
90°
21 mm
90°
21 mm
Ha
8 mm
K
18. Place the small square on the guide
again and fix it with the screws
supplied.
19. Align the kitchen furniture door and the
appliance door by adjusting the part
(Hb).
Hb
20. Press the part (Hd) on the part (Hb).
Hb
Hd
Do a final check to make sure that:
• All screws are tightened.
• The sealing strip is attached tightly to the
cabinet.
• The door opens and closes correctly.
Ha