Options; Acoustic Signals; Before First Use - Electrolux ESL6361LO Benutzerinformation

5. OPTIONS

Activate or deactivate the options
before the start of a programme.
You cannot activate or deactivate
the options while a programme
operates.
If one or more options are set,
make sure that the related indica-
tors are on before the programme
starts.
5.1 Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the flow of rinse
aid and salt. The related indicators are off.
The programme duration can increase.
1. Press the on/off button to activate the
appliance.
2. Make sure that the appliance is in set-
ting mode, refer to 'Setting and start-
ing a programme'.
3.
Press at the same time
.
• Multitab indicator comes on.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Set the water softener to the highest
level.
2. Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener to the water
hardness in your area.
5. Adjust the released quantity of rinse
aid.

6. BEFORE FIRST USE

1. Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local

5.2 Acoustic signals

The acoustic signals operates when the
appliance has a malfunction. It is not pos-
sible to deactivate this acoustic signal.
There is also an acoustic signal that oper-
ates when the programme is completed.
By default, this acoustic signal is off, but it
is possible to activate it.
How to activate the acoustic signal
for the end of programme
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to "Set-
ting and starting a programme".
2. Press and hold, at the same time,
to flash.
3. Press
and
•
• The indicator
• The display shows the current set-
4. Press
5. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
water authority to know the water
hardness in your area.
2. Fill the salt container.
This option is not applicable to
.
and until the
and indicators start
.
The and
off.
flash.
ting.
Acoustic signal on.
Acoustic signal off.
to change the setting.
ENGLISH 7
,
indicators go
continues to