Intended Use - VOLTCRAFT IR 900-30S Bedienungsanleitung

5. INtENDED uSE

the warranty will be void if damage is incurred resulting from non-compliance with these operat-
ing instructions! we do not assume liability for personal injury or material damage resulting from
improper use or disregarding the safety instructions! the exclamation mark indicates important
notes in these operating instructions that should strictly be observed.
• The unauthorized conversion and/or modification of the product is inadmissible for safety and approval
reasons (CE).
• The device should not be subjected to heavy mechanical stress or strong vibrations.
• The device must not be exposed to electromagnetic fields, extreme temperatures, direct sunlight or
moisture.
• The device must not be exposed to high humidity or fluids. When used outdoors, the device may only
be used in appropriate weather conditions or with proper protection.
• Steam, dust, smoke or vapours can impair the optical characteristics of the thermometer and lead to
false measuring results.
• When operating the laser equipment, always make sure that the laser beam is directed so that no-one
is in the projection area and that unintentionally reflected beams (e.g. by a mirror) cannot be directed to
areas where people are present.
• Laser radiation can be dangerous if the laser beam or a reflection enters the unprotected eye. Therefo-
re, before using the laser equipment, familiarise yourself with the statutory regulations and measures of
precaution for the operation of this kind of laser device.
• Never look into the laser beam and never point it at people or animals.
• Do not point the laser beam towards mirrors or other reflecting surfaces. The uncontrolled, deflected
beam could hit persons or animals.
• Never operate the laser unattended.
• If possible, restrict the range of radiation by using screens or partitions.
• Do not use the laser at eye level.
• Caution - if you use any other controls or employ other procedures than those specified in these opera-
ting instructions, you risk the exposure to hazardous radiation.
• This product is equipped with a class 2 laser according to EN 60 825-1. The device is delivered with
laser warning labels in different languages. If the laser warning label is not in your local language,
please attach the appropriate label on the laser.
20
CAUTION LASER RADIATION
DO NOT STARE INTO THE BEAM
CLASS 2 LASER PRODUCT
Output: <1 mW
Wavelength: 630-670 nm
EN 60 825-1:2007