Remote Control Operation - Sharp FU-28H Bedienungsanleitung

Plasmacluster Ion Operation
While the product is in operation, the unit will constantly discharge approximately
the same amount of Positive and Negative cluster ions. This is effective for reducing
some airborne mold.

REMOTE CONTROL OPERATION

POWER ON/OFF button
• Used to start AUTO operation (short beep) and
stop operation (long beep).
• Plasmacluster Indicator Light, and Fan Speed
Indicator Light (AUTO) turn on/off.
• Unless unplug the power cord, the operation
starts in the previous mode the unit was
operated in.
AUTO (Fan Speed) button
The fan speed switches automatically depending
on the amount of impurities in the air.
MANUAL (Fan Speed) button
The fan speed can be switched between Silent,
Max.
Silent
OFF Timer button
• The set timer switches every time the button is
pressed as shown below.
• When "4 hours" is selected "4 H" indicator light
activates. When the remaining time becomes 1
hour, then indicator light switches to "1 H".
1 hour
Cancel
E-13
Max
4 hours