Cleaning And Maintenance - Linea 2000 Domo Do7300S Gebrauchsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

• Reorganising the mapped space.

You can rename, merge or divide the suggested rooms. You can also define no-go zones and

draw virtual walls, so that the robot will not clean certain areas. The robot will not enter no-go

zones or cross virtual walls.

• Mapping your entire home.

You can map multiple areas (e.g. ground floor and upper floor). Save each map in "Map

management", where you can find and reuse the different maps.

You can move the robot to a new area and let it clean there. After the cleaning task, it will

return to the location where you started it. However, without a charging and emptying

station in the room, the container cannot be emptied automatically, the mopping pads will

not be cleaned and water cannot be refilled.

• Scheduling cleaning.

You choose which room, area or zone should be cleaned, how it should be cleaned, and

whether this should be a one-off or recurring task.

• Setting the cleaning mode.

Vacuuming, mopping, vacuuming and mopping, or vacuuming first and mopping afterwards.

• Selecting the suction power.

In the app, you can choose between four suction power settings: quiet, normal, powerful or

max (extra powerful).

• Selecting the water flow level when mopping. In the app, you can choose between three levels:

low, medium and high.

• Selecting the language and volume of the robot's voice.

• Checking the usage time of the various components. This allows you to know exactly when a

component needs to be replaced.

• During cleaning, the robot automatically returns to the charging and emptying station

according to the set frequency. The station refills the water tank and automatically cleans the

mopping pads.

• The app interface can also be connected to and used with a voice assistant.