Linea 2000 DOMO DO7300S Gebrauchsanleitung Seite 72

DIRTY WATER TANK
1. Remove the dirty water tank ("DIRTY") from the station. Open the lid and pour the water out of
the tank.
2. Rinse the tank with warm water. Clean the tank using a cleaning brush and allow it to dry
completely. Wipe the exterior clean with a soft cloth.
3. Place the tank back into the station.
DUST CONTAINER
1. Remove the top cover of the robot vacuum cleaner and take out the dust container by pressing
the container latch and lifting it up.
2. Remove the HEPA filter and the pre-filter sponge from the container by pulling the right side
(marked with an arrow
3. Empty the dust container over a rubbish bin.
4. Gently tap the dust out of the HEPA filter and pre-filter sponge and clean them using a small
cleaning brush.
5. Rinse the dust container, HEPA filter and pre-filter sponge under running water. Allow all parts
to dry completely before reinstalling them.
1
3
72
1
) towards you.
4
www.domo-elektro.be
2
2
5