Linea 2000 DOMO DO7300S Gebrauchsanleitung Seite 71

COMPONENT
Swivel wheel
All sensors
Dust bag
The service life of the brushes, filters and mopping pads can also be viewed in the app under
"Consumables management". After replacing one of the components, you can reset the counter for
that component in the app.
I
Do not immerse unit, cord, or plug in water or other liquid.
I
Never use aggressive or abrasive cleaning agents.
REPLACING THE DUST BAG
1. Open the cover of the dust bag compartment by unclipping it on both sides.
2. Carefully pull the dust bag out of the slot using the dust bag guide plate.
3. Dispose of the full dust bag and insert a new, empty dust bag into the charging and emptying
station. Slide the dust bag guide plate into the designated slot.
4. Refit the compartment cover until it clicks into place.
1
CLEANING PLATE
1. Remove the cleaning plate from the station.
2. Rinse the plate under running water and clean it using a small cleaning brush.
3. Dry the plate and place it back into the station.
I
Check that the water outlet hose of the charging and emptying station is correctly
positioned on the cleaning plate.
MAINTENANCE
FREQUENCY
Once per month
Once per month
–
2
1
www.domo-elektro.be
REPLACEMENT
FREQUENCY
–
–
When the dust bag is fu
3
2
4
71