Parkside Performance PLGS 2012 A1 Originalbetriebsanleitung Seite 15

3. Confirm the dialog box.
Privacy policy
see Page More; Section Legal,
Privacy policy
Cleaning, maintenance
and storage
WARNING! Electric shock! Pro-
tect yourself when performing main-
tenance or cleaning work. Pull the
mains plug and remove the battery.
You should have any repair and
maintenance work that is not de-
scribed in these instructions carried
out by our Service Centre. Only use
original replacement parts.
Cleaning
Clean the charger with a dry cloth or
with a paintbrush. Do not use water
or metal objects.
Maintenance
The device is maintenance free.
Storage
How to store the product:
• clean,
• dry,
• protected against dust,
• out of the reach of children.
The storage temperature for the
rechargeable battery and tool is
between 15 – 25 °C. Avoid extreme
cold or heat during storage, so that
the battery does not lose perform-
ance.
Remove the battery before storing
the device for a long period of time
(e.g. winter storage).
Wall mounting for charger
(optional)
You can also attach the charger (5) to
the wall.
Notes
• When drilling, be careful not to
damage any supply lines. Use
suitable search devices to find
these or consult an installation
plan for guidance.
• Contact with electrical cables can
lead to electric shock and fire.
Contact with a gas line can result
in an explosion.
• Damage to a water pipe can lead
to property damage and electric
shock.
• Screws and dowels are not in-
cluded in delivery.
• Suitable diameter of screw head:
7 mm
Procedure
1. Using dowels, place two screws
at the desired position on a wall.
Distance between the screws:
101.6 mm
2. Leave the screw heads protrud-
ing from the wall. Distance to the
wall: ≈10 mm
3. Place the charger with the open-
ings of the wall bracket over the
two screws and pull it down as far
as it will go.
Disposal/environmental
protection
Remove the battery from the device
and recycle the device, battery,
accessories and packaging in an
environmentally-friendly manner.
GB IE NI CY
15