Intended Use; Safety Information - Scheppach 5906137901 Originalbetriebsanleitung

Scope of delivery:
Item Quantity Designation
5 1x Pressure hose
A 1x Universal adapter, for valves
with diameter ca. 6 mm
B 1x Universal adapter, for valves
with diameter ca. 9 mm
C 1x Adapter for H, K
D 1x Blow-out adapter
E 1x Valve adapter, e.g. For bicycle
valves
F 1x Ball needle
G 1x Tyre inflater
H 1x Deflating adapter
I 1x Screw-on valve adapter
K 1x Universal adapter
1x Original Operating Manual

4. Intended use

The compressor is designed to generate compressed
air for compressed-air driven tools which can be driven
with an air volume of up to approx. 85 l/min (e.g. tire
inflator, blow-out pistol and paint spray gun). Due to
the limited air output it is not possible to use the com-
pressor to drive tools with very high air consumption
(for example orbital sanders, rod grinders and hammer
screwdrivers).
The compressor may only be operated in a dry and
well ventilated indoor space.
The equipment is to be used only for its prescribed pur-
pose. Any other use is deemed to be a case of misuse.
The user / operator and not the manufacturer will be
liable for any damage or injuries of any kind caused as
a result of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the equipment is used in
commercial, trade or industrial businesses or for equiv-
alent purposes.
20 | GB

5. Safety information

m Attention! The following basic safety actions must
be taken when using this compressor in order to pro-
tect the user from electric shocks and the risk of injury
and fire.
Read and follow these instructions before using the
equipment.
Safe work
1. Keep the work area orderly
- Disorder in the work area can lead to accidents.
2. Take environmental influences into account
- Do not expose power tools to rain.
- Do not use electric tools in a damp or wet envi-
ronment. There is a risk of electric shock!
- Make sure that the work area is well-illuminated.
- Do not use power tools where there is a risk of
fire or explosion.
3. Protect yourself from electric shock
- Avoid physical contact with earthed parts (e. g.
pipes, radiators, electric ranges, cooling units).
4. Keep away from children!
- Do not allow other persons to touch the equipment
or cable, keep them away from your work area.
5. Securely store unused electric tools
- Unused power tools should be stored in a dry,
elevated or closed location out of the reach of
children.
6. Do not overload your power tool
- They work better and more safely in the speci-
fied output range.
7. Dress properly
- Do not wear wide clothing or jewellery, which
can become entangled in moving parts.
- Rubber gloves and anti-slip footwear are rec-
ommended when working outdoors.
- Tie long hair back in a hair net.
8. Do not use the cable for purposes for which it is
not intended
- Do not use the cable to pull the plug out of the
outlet. Protect the cable from heat, oil and sharp
edges.
9. Take care of your tools
- Keep your compressor clean in order to work
well and safely.
- Follow the maintenance instructions.
- Check the connection cable of the power tool
regularly and have it replaced by a recognised
specialist when damaged.
www.scheppach.com