Change Of The Hinge Position; Temperature Control - Pkm KS 184.4A+ N EB Bedienungsanleitung

b. Fix the two feet (predrilled holes).
c. Install the plastic joint gasket if your appliance is equipped with.
d. Screw part X on the door of the appliance.
e. Fix the sliding part Y on the properly-adjusted door of the cabinet.

Change of the hinge position

WARNING! Switch off and unplug the appliance before changing the
hinge position. RISK OF ELECTRIC SHOCK!
CAUTION! The change of the hinge position must be carried out by
at least two persons; otherwise you may hurt yourself or damage the
appliance. Do not tilt the appliance more than 45
a. Remove the screws S of the lower bottom unit.
b. Remove parts A and B of the lower hinge unit. Now the door is disengaged.
c. Remove parts A1, B1 and B3.
d. Turn around part B1 and fix the pin B3 on B1, then fix it on A2 (look at C).
e. Turn around part A1 and fix it on B2 (look at D).
f. Remove the top hinge pin and install it on the opposite side.
g. Fix the lower hinge units C, D.
NOTICE! Adjust the door properly. The seal must close properly.
4
Appliance

Temperature control

1. After installation wait 4-6 hours before you connect the appliance to the mains.
Clean the appliance before you operate it for the first time.
OPERATION
1 Shelves
2 Crisper
3 Thermostat
4 Egg tray
5 Bottle pocket
25
0
.
4