Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
kind of dirt.
2
Look at chap. T
class of your appliance. Your appliance can be operated in rooms with
relevant room temperatures as named below.
CLIMATIC CLASS
SN
ST
3
You will find the relevant installation drawings in chapter 11 at the end
of this instruction manual.
Fridge-cabinet
1. The dimensions of the fridge-cabinet must meet the dimensions on the
installation drawing.
2. The air at the back of the appliance becomes warm so the cabinet must have
sufficient free space for ventilation.
3. The air inlet for the appliance must be at the base of the cabinet.
4. Free space of at least 38 mm behind the appliance for proper air circulation is
required.
5. The cross-sectional area for ventilation at the base and top of the cabinet must
be at least 300 cm
6. Never block or cover the ventilation openings. Clean and dust them
periodically.
Mounting
Put the fridge into the cabinet. Place the fridge with the side to be opened
against the side wall of the cabinet.
a. Fix the top of the appliance through the predrilled holes of the panel above the
front fascia using the supplied screws.
CLIMATIC CLASSES
D
ECHNICAL
N
T
INSTALLATION
2
to allow warmed air to escape the cabinet.
for information about the climatic
ATA
AMBIENT TEMPERATURE
0
0
+10
→+32
0
0
+16
→+32
0
0
+16
→+38
0
0
+16
→+43
24
C
e.g. unheated cellar
C inner home temperature
C inner home temperature
C inner home temperature
2
3
Werbung
Inhaltsverzeichnis
